How to Manually Update the Vault in my ReadyNAS

  • Go to your ReadyNAS web interface (Frontview) using the NAS IP address (e.g. 10.0.1.190)
    • If you don't know the NAS IP address, download and run RAIDar™. Then, select your device and click "Setup"
  • Download the add-on for your ReadyNAS device model from the links below to your local computer.
  • You can find the model of your ReadyNAS in the RAIDar listed under Model OR you can find the model on the ReadyNAS web interface.
  • Follow the installation instructions for your NAS OS version:
    • OS 4: From the Frontview, go to System → Update → Local → Browse and locate the add-on that you downloaded from the link above → Verify and Upload Image.
    • OS 5: From the Frontview, go to Add-ons → Add Add-on → Browse and locate the add-on that you downloaded from the link above → Upload.
    • OS 6: From the Frontview, go to Apps → Upload → Browse and locate the add-on that you downloaded from the link above → Upload . Once the upload is finished, the system may not automatically prompt you to reboot the NAS.
  • Note: In order for the Add-on installation to complete successfully, you will need to reboot your ReadyNAS device. For this reason, it might be best to schedule the update during a time that no users are using the device.
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk